PLC Interface

From Wiki
Revision as of 16:21, 14 August 2017 by Chmeyer (talk | contribs) (Created page with "It is often necessary to integrate the robot into a production system. One component is normally the master that orchestrates the other devices. With this interface the CPR ro...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

It is often necessary to integrate the robot into a production system. One component is normally the master that orchestrates the other devices. With this interface the CPR robot can be controlled by a master, e.g. a PLC. The PLC sets digital inputs to reference, reset and enable the robot, and it can start/stop the loaded program. The robot provides information on its current status using digital outputs.

Availability: This feature is available since CPRog V902-09-011 (August 2017). Please see CPRog Updates.

1. Available Channels

    • eins
    • zwei


2. Configuration

Retrieved from "http://wiki.cpr-robots.com/index.php?title=PLC_Interface&oldid=128"