Difference between revisions of "Software Updates"

From Wiki
 
(202 intermediate revisions by 3 users not shown)
Line 1: Line 1:
−
Here you can find updates for the CPRog robot programming environment and the according documentation.  
+
Below you will find links to the current versions of the robot control software.
  
 +
* '''CPRog:''' Robot control and programming software
 +
* '''igus Robot Control (iRC):''' Functionally equal to CPRog but with an igus specific selection of robots
 +
* '''TinyCtrl:''' The robot control software that runs on the embedded computer. It is controlled via CPRog, iRC or its interfaces.
  
−
Attention! When using the standard installation directory the installation is done on top of the current program version. This will not delete user generated files (program files or the license) but will update the standard configuration files and doing this erase user changes. To prevent this rename the old  installation e.g. to  c:\CPRogold.
 
  
−
== Download current CPRog Robot Programming Environment ==
+
[[file:caution.png|left|25px]] Caution! After a software update test your robot programs for compatibility and motion deviations first with small velocites!
  
−
[http://www.cpr-robots.com/download/CPRog/CPRogInstaller_V902-09.exe Download latest CPRog V902-09 Installer]
 
  
−
This version supports the following robots: Mover4, Lucas-Nuelle Mover4HD, Mover5, Mover6, SRA, igus_gantry, igus robolink. The correct project with your specific robot arm can be loaded using the 'open project' menu entry in the upper left circle. 
+
= System Requirements =
 +
CPRog/iRC requires the following to run:
 +
* Windows 10 64 bit
 +
* .NET Framework 4.7.2 or higher
 +
* OpenGL 3.0 or higher
 +
* The driver from your graphics card manufacturer (the Microsoft default driver does not work)
  
−
Attention!! The 'gripper' command since V08 operates the gripper now. This allows to make use of more complex grippers with servodrives and several joints. The previous use of the digital outputs 11 and 12 does not work anymore. Existing programs have to be adapted.
+
= Downloads =
 +
Both CPRog and iRC are available as a standalone installer for Windows and bundled with the TinyCtrl updater.
  
−
---- 
+
Latest changes:
−
Change Log
+
* [https://cpr-robots.com/download/igusRobotControl/Software/VersionInfoV14.txt Changelog V14]
−
* V902-09-012, Sept 6th, 2017  Removed imprecision in 5 axis kinematic; debugging RL-DQ with y-Translation
+
* [https://cpr-robots.com/download/igusRobotControl/Software/VersionInfo.txt Changelog V13]
−
* V902-09-010, Aug 14th, 2017  robolink DQ added, bug in DIO module removed, [[PLC Interface]] and reference-in-one added
 
−
* V902-09-009, May 18th, 2017  Major updates, still minor debugging to do. Text editor with several programs, igus robolink variants added 
 
−
* V902-09-006, Nov. 17th, 2016 GearPlay added for CANV2 (Mover6), minor debugging
 
−
* V902-09-005, Nov. 15th, 2016 Joypad direction can be set in project file, minor debugging, igus robots added
 
−
* V902-09-004  Nov . 4nd  2016 Minor debugging
 
−
* V902-09-003  Nov . 2nd  2016 Preliminary! general debugging
 
−
* V902-09-002  Nov . 1st  2016 Preliminary! graphics debugging, alignment, gripper command, syntax check in  textedit, general debugging
 
  
 +
== igus Robot Control ==
 +
* [[IgusRobotControl-Release14-EN|Version 14]]
 +
* [[IgusRobotControl-Release13-EN|Version 13]]
 +
* [[IgusRobotControl-Release12-EN|Version 12]]
  
−
---- 
+
== CPRog ==
−
== Documentation ==
+
=== Installer for Windows ===
−
* [http://www.cpr-robots.com/download/CPRog/UserGuide_igusRobolink.pdf robolink User Guide]
+
* [https://cpr-robots.com/download/CPRog/Installer_CPRog_V13-040.exe Version V13-040]
−
* [http://www.cpr-robots.com/download/CPRog/UserGuide_Mover4_V15.pdf Mover4 User Guide]
+
* [https://cpr-robots.com/download/CPRog/Installer_CPRog_V12-028.exe Version V12-028]
−
* [http://www.cpr-robots.com/download/CPRog/UserGuide_Mover6_V01.pdf Mover6 User Guide]
 
−
* For the CRI robot interface user guide go to the  according page: [[CRI Ethernet Interface]]
 
−
* For the CAN-protocol documentation go to the according page [[CAN Protocol]]
 
  
 +
=== Updater CPRog and TinyCtrl ===
 +
* [https://cpr-robots.com/download/TinyCtrlUpdater/Updater_CPROG_V13-039.zip Updater_CPROG_V13-039.zip]
 +
* [https://cpr-robots.com/download/TinyCtrlUpdater/Updater_CPROG_V12-028.zip Updater_CPROG_V12-028.zip]
  
−
---- 
+
= Documentation =
−
 
−
== Installation ==
 
−
 
 
−
Installation has to be done in c:\CPRog. CPRog requires a specific DirectX version and the .net framework. If an old version is updated no changes are  necessary. If the installation is done the first time on the computer the files can be installed here:
 
  
−
* Directx 9.0c:  (exactly this version) A newer version might already be  installed. It is no problem to install two versions in parallel. You can search the web for the download or use this link [https://www.microsoft.com/de-de/download/details.aspx?id=34429 https://www.microsoft.com/de-de/download/details.aspx?id=34429}
+
We are currently updating the CPRog documentation, until then please use the documentation for the iRC igus Robot Control. The functionality is identical.
−
* .net Framework: 3.5 or higher.  
 
  
−
When the installer starts from CD these frameworks are loaded from the CD. When the installer starts without CD it tries to download the frameworks from the internet. This requires a running internet connection and takes quite a time. Alternatively install by hand.
+
You can find the user guide for your robot here: [[Documentation]].
 +
 
 +
= Installation =
 +
 
 +
[[file:caution.png|left|25px]]When using the standard installation directory, the installation of the update is done on top of the current program version. This will not delete user generated files (program files or the license). However, it will update the standard configuration files and erase user changes made to those files. To prevent this rename the old installation e.g. to <code>c:\CPRogold</code> prior to running the installer. You can copy your changed configurations over from the Data\Programs, Data\Projects, Data\Robots and Data\Tools directories inside the installation directory.
 +
 
 +
Please run the Installer_CPRog_V902_nn-nnn.exe. The installation has to be done in C:\CPRog.
 +
 
 +
= Backward Compatibility =
 +
 
 +
Hardware: The current software version is compatible to all igus robots and all Mover robots delivered in 2017 and later.
 +
 
 +
Robot Programs: The current software versions are compatible to the versions shipped since July 2018: V902-10-021 and higher. Configuration changes may cause different behavior so after an update please test the program with a low velocity override.
 +
 
 +
Interfaces: Please see the according interface documentation.  
 +
 
 +
 
 +
If there are any incompatibilites please get to us, we can solve the problem!
 +
[[Category:CPRog]][[Category:TinyCtrl]][[Category:Downloads]]

Latest revision as of 10:59, 4 April 2024

Below you will find links to the current versions of the robot control software.

  • CPRog: Robot control and programming software
  • igus Robot Control (iRC): Functionally equal to CPRog but with an igus specific selection of robots
  • TinyCtrl: The robot control software that runs on the embedded computer. It is controlled via CPRog, iRC or its interfaces.


Caution.png

Caution! After a software update test your robot programs for compatibility and motion deviations first with small velocites!


System Requirements

CPRog/iRC requires the following to run:

  • Windows 10 64 bit
  • .NET Framework 4.7.2 or higher
  • OpenGL 3.0 or higher
  • The driver from your graphics card manufacturer (the Microsoft default driver does not work)

Downloads

Both CPRog and iRC are available as a standalone installer for Windows and bundled with the TinyCtrl updater.

Latest changes:

igus Robot Control

CPRog

Installer for Windows

Updater CPRog and TinyCtrl

Documentation

We are currently updating the CPRog documentation, until then please use the documentation for the iRC igus Robot Control. The functionality is identical.

You can find the user guide for your robot here: Documentation.

Installation

Caution.png

When using the standard installation directory, the installation of the update is done on top of the current program version. This will not delete user generated files (program files or the license). However, it will update the standard configuration files and erase user changes made to those files. To prevent this rename the old installation e.g. to c:\CPRogold prior to running the installer. You can copy your changed configurations over from the Data\Programs, Data\Projects, Data\Robots and Data\Tools directories inside the installation directory.

Please run the Installer_CPRog_V902_nn-nnn.exe. The installation has to be done in C:\CPRog.

Backward Compatibility

Hardware: The current software version is compatible to all igus robots and all Mover robots delivered in 2017 and later.

Robot Programs: The current software versions are compatible to the versions shipped since July 2018: V902-10-021 and higher. Configuration changes may cause different behavior so after an update please test the program with a low velocity override.

Interfaces: Please see the according interface documentation.


If there are any incompatibilites please get to us, we can solve the problem!

Retrieved from "http://wiki.cpr-robots.com/index.php?title=Software_Updates&oldid=3601"