Difference between revisions of "Software Updates"

From Wiki
 
(98 intermediate revisions by 3 users not shown)
Line 1: Line 1:
−
Here you can find updates for the CPRog robot programming environment and the corresponding documentation.  
+
Below you will find links to the current versions of the robot control software.
  
−
== Download current CPRog Robot Programming Environment ==
+
* '''CPRog:''' Robot control and programming software
 +
* '''igus Robot Control (iRC):''' Functionally equal to CPRog but with an igus specific selection of robots
 +
* '''TinyCtrl:''' The robot control software that runs on the embedded computer. It is controlled via CPRog, iRC or its interfaces.
  
−
===a) Version 10: For robolink arms and drylin 3 axis gantries - not for Movers===
 
−
 
−
Supported robots: igus robolink, igus 3 axis gantry
 
  
−
Improved motion with acceleration profile, improved condition parser.
+
[[file:caution.png|left|25px]] Caution! After a software update test your robot programs for compatibility and motion deviations first with small velocites!  
−
Notice: Program syntax changes, V09 programs will not run without adaptions!
 
  
  
−
[[file:caution.png|left|25px]]When using the standard installation directory, the installation of the update is done on top of the current program version. This will not delete user generated files (program files or the license). However, it will update the standard configuration files in turn erase user changes made to those files. To prevent this rename the old  installation e.g. to <code>c:\CPRogold</code> prior to running the installer.
+
= System Requirements =
 +
CPRog/iRC requires the following to run:
 +
* Windows 10 64 bit
 +
* .NET Framework 4.7.2 or higher
 +
* OpenGL 3.0 or higher
 +
* The driver from your graphics card manufacturer (the Microsoft default driver does not work)
  
 +
= Downloads =
 +
Both CPRog and iRC are available as a standalone installer for Windows and bundled with the TinyCtrl updater.
  
−
[[file:caution.png|left|25px]] Caution! After update test your robot programs for compatibility and motion deviations first with small velocites!
+
Latest changes:
 +
* [https://cpr-robots.com/download/igusRobotControl/Software/VersionInfoV14.txt Changelog V14]
 +
* [https://cpr-robots.com/download/igusRobotControl/Software/VersionInfo.txt Changelog V13]
  
 +
== igus Robot Control ==
 +
* [[IgusRobotControl-Release14-EN|Version 14]]
 +
* [[IgusRobotControl-Release13-EN|Version 13]]
 +
* [[IgusRobotControl-Release12-EN|Version 12]]
  
−
*Software: [http://www.cpr-robots.com/download/CPRog/CPRogInstaller_V902-10-032.exe Download latest CPRog V902-10-032 Installer]. You will need to install these [[#Prerequisites|prerequisites]] as well.
+
== CPRog ==
−
*[[Software change-log CPRogV10]]
+
=== Installer for Windows ===
−
*Documentation / Manual EN: [http://www.cpr-robots.com/download/CPRog/UserGuide_igusRobolink.pdf robolink User Guide]
+
* [https://cpr-robots.com/download/CPRog/Installer_CPRog_V13-040.exe Version V13-040]
−
*Documentation / Manual DE: [http://www.cpr-robots.com/download/CPRog/Bedienungsanleitung_igusRobolink_DE.pdf robolink Bedienungsanleitung]
+
* [https://cpr-robots.com/download/CPRog/Installer_CPRog_V12-028.exe Version V12-028]
−
*Command Reference EN: [http://www.cpr-robots.com/download/CPRog/CPR_CommandReference.pdf CPRog Command Reference]
 
  
−
===b) Version 09: For Movers===
+
=== Updater CPRog and TinyCtrl ===
−
This version supports the following robots: Mover4, Lucas-Nuelle Mover4HD, Mover5, Mover6. The correct project with your specific robot arm can be loaded using the 'open project' menu entry in the upper left circle.
+
* [https://cpr-robots.com/download/TinyCtrlUpdater/Updater_CPROG_V13-039.zip Updater_CPROG_V13-039.zip]
 +
* [https://cpr-robots.com/download/TinyCtrlUpdater/Updater_CPROG_V12-028.zip Updater_CPROG_V12-028.zip]
  
−
* Software: [http://www.cpr-robots.com/download/CPRog/CPRogInstaller_V902-09.exe Download latest CPRog V902-09 Installer] You will need to install these [[#Prerequisites|prerequisites]] as well.
+
= Documentation =
−
* [[Software change-log CPRogV09]]
 
−
* Documentation / Manual: [http://www.cpr-robots.com/download/CPRog/UserGuide_igusRobolink_SWVersion09.pdf robolink User Guide for SW version 09]
 
−
* Mover4 user guide: [http://www.cpr-robots.com/download/CPRog/UserGuide_Mover4_V15.pdf Mover4 User Guide]
 
−
* Mover6 user guide: [http://www.cpr-robots.com/download/CPRog/UserGuide_Mover6_V01.pdf Mover6 User Guide]
 
  
 +
We are currently updating the CPRog documentation, until then please use the documentation for the iRC igus Robot Control. The functionality is identical.
  
−
[[file:caution.png|left|25px]]When using the standard installation directory, the installation of the update is done on top of the current program version. This will not delete user generated files (program files or the license). However, it will update the standard configuration files in turn erase user changes made to those files. To prevent this rename the old  installation e.g. to <code>c:\CPRogold</code> prior to running the installer.  
+
You can find the user guide for your robot here: [[Documentation]].
  
 +
= Installation =
  
−
[[file:caution.png|left|25px]]Since V08 the 'gripper' command is used to operate the gripper. This allows the use of more complex grippers with servo-drives and several joints. The previous procedure using the digital outputs 11 and 12 is obsolete. Existing programs have to be adapted.
+
[[file:caution.png|left|25px]]When using the standard installation directory, the installation of the update is done on top of the current program version. This will not delete user generated files (program files or the license). However, it will update the standard configuration files and erase user changes made to those files. To prevent this rename the old installation e.g. to <code>c:\CPRogold</code> prior to running the installer. You can copy your changed configurations over from the Data\Programs, Data\Projects, Data\Robots and Data\Tools directories inside the installation directory.
−
<br clear=all>
 
  
−
== Documentation ==
+
Please run the Installer_CPRog_V902_nn-nnn.exe. The installation has to be done in C:\CPRog.
−
* Documentation / Manual EN Robolink V10: [http://www.cpr-robots.com/download/CPRog/UserGuide_igusRobolink.pdf robolink User Guide]
 
−
* Documentation / Manual DE Robolink V10: [http://www.cpr-robots.com/download/CPRog/Bedienungsanleitung_igusRobolink_DE.pdf robolink Bedienungsanleitung]
 
−
* Documentation / Manual EN Robolink V09: [http://www.cpr-robots.com/download/CPRog/UserGuide_igusRobolink_SWVersion09.pdf robolink User Guide for SW version 09]
 
−
* Mover4 user guide: [http://www.cpr-robots.com/download/CPRog/UserGuide_Mover4_V15.pdf Mover4 User Guide]
 
−
* Mover6 user guide: [http://www.cpr-robots.com/download/CPRog/UserGuide_Mover6_V01.pdf Mover6 User Guide]
 
−
* For the CRI robot interface user guide go to the relevant page: [[CRI Ethernet Interface]]
 
−
* For the CAN-protocol documentation go to the relevant page [[CAN Protocol]]
 
  
−
== Installation ==
+
= Backward Compatibility =
−
Installation has to be done in C:\CPRog. CPRog requires a specific DirectX version and .net framework 3.5 or higher (see below). If an old CPRog installation is updated, no changes to DirectX or .net Framework are necessary. If CPRog is installed for the first time, the following packages have to be installed:
 
  
−
===Prerequisites===
+
Hardware: The current software version is compatible to all igus robots and all Mover robots delivered in 2017 and later.
−
* [http://www.cpr-robots.com/download/CPRog/DirectX.zip Directx 9.0c] (exactly this version) A newer version might already be installed. However, it is no problem to install two versions in parallel.
 
−
* .net Framework: 3.5 or higher https://www.microsoft.com/net/download/Windows/run
 
−
* If you use a PCAN-USB [https://www.peak-system.com/PCAN-USB.199.0.html USB to CAN adapter], you also need to install this [https://www.peak-system.com/quick/DrvSetup driver] from PEAK system.
 
  
−
If you install CPRog from the CD supplied with your control electronics, DirectX9.0c and .net Framework and the PCAN-USB adapter driver are installed directly from the CD. If the installer starts without CD, it tries to download the dependencies from the internet. This requires a working internet connection.
+
Robot Programs: The current software versions are compatible to the versions shipped since July 2018: V902-10-021 and higher. Configuration changes may cause different behavior so after an update please test the program with a low velocity override.
−
[[Category:CPRog]][[Category:Downloads]]
 
  
−
==Demo==
+
Interfaces: Please see the according interface documentation.
−
Programming and control of a robolink DCi robot in CPRog.
+
 
−
{{#evt:
+
 
−
service=youtube
+
If there are any incompatibilites please get to us, we can solve the problem!
−
|id=https://youtu.be/9LWbj4UqOnw
+
[[Category:CPRog]][[Category:TinyCtrl]][[Category:Downloads]]
−
|alignment=left}}
 

Latest revision as of 10:59, 4 April 2024

Below you will find links to the current versions of the robot control software.

  • CPRog: Robot control and programming software
  • igus Robot Control (iRC): Functionally equal to CPRog but with an igus specific selection of robots
  • TinyCtrl: The robot control software that runs on the embedded computer. It is controlled via CPRog, iRC or its interfaces.


Caution.png

Caution! After a software update test your robot programs for compatibility and motion deviations first with small velocites!


System Requirements

CPRog/iRC requires the following to run:

  • Windows 10 64 bit
  • .NET Framework 4.7.2 or higher
  • OpenGL 3.0 or higher
  • The driver from your graphics card manufacturer (the Microsoft default driver does not work)

Downloads

Both CPRog and iRC are available as a standalone installer for Windows and bundled with the TinyCtrl updater.

Latest changes:

igus Robot Control

CPRog

Installer for Windows

Updater CPRog and TinyCtrl

Documentation

We are currently updating the CPRog documentation, until then please use the documentation for the iRC igus Robot Control. The functionality is identical.

You can find the user guide for your robot here: Documentation.

Installation

Caution.png

When using the standard installation directory, the installation of the update is done on top of the current program version. This will not delete user generated files (program files or the license). However, it will update the standard configuration files and erase user changes made to those files. To prevent this rename the old installation e.g. to c:\CPRogold prior to running the installer. You can copy your changed configurations over from the Data\Programs, Data\Projects, Data\Robots and Data\Tools directories inside the installation directory.

Please run the Installer_CPRog_V902_nn-nnn.exe. The installation has to be done in C:\CPRog.

Backward Compatibility

Hardware: The current software version is compatible to all igus robots and all Mover robots delivered in 2017 and later.

Robot Programs: The current software versions are compatible to the versions shipped since July 2018: V902-10-021 and higher. Configuration changes may cause different behavior so after an update please test the program with a low velocity override.

Interfaces: Please see the according interface documentation.


If there are any incompatibilites please get to us, we can solve the problem!

Retrieved from "http://wiki.cpr-robots.com/index.php?title=Software_Updates&oldid=3601"