Use Cases Mover Robots

From Wiki
Revision as of 22:38, 11 May 2018 by Peter (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Which use cases are a good match for the Mover robot arms?

The Mover4 and Mover6 robot arms have been developed for educational purposes, R&D tasks and entertainment applications. The Mover provides an intuitive entry into robotics and is available at quite low costs (please have a look at our online shop). It is not a panacea and cannot replace a standard industrial robot.

Regarding velocities, precision, etc. please have a look at the specifications page.


The Mover robot arms are suitable for the following use cases:

  • Education, R&D and other comparable tasks
  • Pick-and-place tasks
  • Positioning of sensors and cameras
  • Testing touch screens
  • Standard joint and linear motions with 4 or 6 joints

The Mover robot arms are _not_ suitable for the following use cases:

  • Replacing a standard industrial robot arm
  • Industrial production
  • Continuous operation
  • High precision tasks regarding a precise end position or a precise path ... for these tasks you might want to have a look at a gantry robot
  • Tasks that require smooth and slow motions like drawing writing engraving milling ... for these tasks you might want to have a look at a gantry robot
  • Tasks that require to apply force on a defined vector like pressing parts into a fitting

Please get in contact (info(at)cpr-robots.com) if you are not sure about the suitability of the mover for the application you have in mind. We are looking forward to discuss it with you!