Rebel Joint

From Wiki
Revision as of 12:45, 25 April 2022 by Chmeyer (talk | contribs) (→‎Manual)

This page provides information and first steps support on the igus Rebel joint modules.

Manual

Product user guide: (will follow soon).


Documentation of the motor controller in

DE: BLDCBoard_UserGuide_iRC_en.pdf

EN: BLDCBoard_UserGuide_iRC_de.pdf


This document contains dimensions, pin-outs, behavior and the description of the parameter. The communication protocol is described below.

Test and Configuration Software

The software tool "ModuleControl" allows to move a single joint in different operations modes. It also allows to change the motion parameter on the board. ModuleControl needs a USB to CAN adapter from PeakSysteme, the PCAN-USB.

Please download the software at the ModuleControl wiki page, please use the ClosedLoop-Version: Config Software ModuleCtrl

Communication Protocol

The motor controller uses a CAN based custom protocol called CPRCANV2. This simple protocol sends and receives 32 bit position information. CANopen ist not supported.

Protocol specification:

Demo Source Code

A C# VisualStudio2019 solution is available to show the basic communication with a Rebel joint. This demo code makes use of the Peak Systeme PCAN-USB adapter. The demo source code lies on github: CANV2ProtocolDemoClient

Contact

In case of questions please contact Alexander Mühlens at igus GmbH.