Difference between revisions of "Changing Robot Parameters"
From Wiki
| Line 2: | Line 2: | ||
''!!!'' | ''!!!'' | ||
| − | |||
''Please be aware that changing these parameter might lead to collisions and other problems! Change the parameter with care and in small increments. Perform tests after the changes.'' | ''Please be aware that changing these parameter might lead to collisions and other problems! Change the parameter with care and in small increments. Perform tests after the changes.'' | ||
| − | |||
''!!!'' | ''!!!'' | ||
Revision as of 13:42, 2 July 2017
CPRog uses different robot specific parameter, e.g. maximum allowable joint velocities or the minimum and maximum allowable joint motion. These parameter are defined in XML files and can be adapted to the specific needs.
!!! Please be aware that changing these parameter might lead to collisions and other problems! Change the parameter with care and in small increments. Perform tests after the changes. !!!
1. Location of the parameter file
sdf
2. Joint velocity
sdf
3. Joint min/max travel limits
sdf
For questions or comments please get in contact with us: info(at)cpr-robots.com
