Difference between revisions of "Glossary"
From Wiki
| Line 18: | Line 18: | ||
|- | |- | ||
| CPRog | | CPRog | ||
| − | | | + | | 3D robot programming and control software with graphical program editor |
| http://www.cpr-robots.com/products/cprog.html | | http://www.cpr-robots.com/products/cprog.html | ||
|- | |- | ||
| DIO | | DIO | ||
| − | | Digital | + | | Digital input/output |
| [[Digital_Inputs_/_Outputs]] | | [[Digital_Inputs_/_Outputs]] | ||
|- | |- | ||
Revision as of 17:29, 13 May 2018
| Name | Description | Link |
|---|---|---|
| A1, A2, A3... | Robot axes (same as J1, J2, J3,...): A1 would be the first axis counting from the base of the robot. | |
| CAN bus | Controller Area Network | https://en.wikipedia.org/wiki/CAN_bus |
| CPR | Commonplace Robotics GmbH | http://www.cpr-robots.com |
| CPRog | 3D robot programming and control software with graphical program editor | http://www.cpr-robots.com/products/cprog.html |
| DIO | Digital input/output | Digital_Inputs_/_Outputs |
| DOF | Degrees of Freedom / the number of robot joints or axes. | |
| J1, J2, J3,... | Robot joints (same as A1, A2, A3): J1 would be the first joint counting from the base of the robot. | |
| SRA | Service Robot Arm | http://www.cpr-robots.com/products/sra.html |
| ROS | Robot Operating System | http://www.ros.org |
