Difference between revisions of "External Linear Axis in CPRog v980-10-XXX"
From Wiki
(Created page with "To use an external linear axis an additional stepper motor module needs to be configured, changes to the project file need to be made and a robot file for the external linear...") |
|||
| Line 2: | Line 2: | ||
=Module Configuration= | =Module Configuration= | ||
| − | The stepper motor module will need new firmware parameters. These have to be configured using the [[ModuleCtrl Software]] | + | The stepper motor module will need new firmware parameters. These have to be configured using the [[Config_Software_ModuleCtrl|ModuleCtrl Software]] |
Revision as of 14:16, 20 November 2018
To use an external linear axis an additional stepper motor module needs to be configured, changes to the project file need to be made and a robot file for the external linear axis has to be installed and potentially adapted.
Module Configuration
The stepper motor module will need new firmware parameters. These have to be configured using the ModuleCtrl Software
