Difference between revisions of "External Axis"
From Wiki
| Line 3: | Line 3: | ||
===Hardware Connections=== | ===Hardware Connections=== | ||
| − | Connect the external Axis just like all other axes. | + | Connect the external Axis just like all other axes. See pinout below: |
[[File:ExternalAxisSchematic.png|600px]] | [[File:ExternalAxisSchematic.png|600px]] | ||
<br clear=all> | <br clear=all> | ||
| + | ===Configuration=== | ||
| + | <gallery> | ||
| + | File:ExternalAxis1.png|Switch on the Robot and start CPRog/iRC. | ||
| + | File:ExternalAxis2.png|Click on "File". Then select your Robot type. | ||
| + | File:ExternalAxis1.png|Click on Connect. Once connected, click on "File" again. | ||
| + | File:ExternalAxis2.png|Click on "Configure Project" | ||
| + | File:ExternalAxis3.png|Click on "External Axes" | ||
| + | File:ExternalAxis4.png|Configure your external Axis. | ||
| + | </gallery> | ||
| + | |||
| + | File:ExternalAxis1.png| | ||
===Configuration=== | ===Configuration=== | ||
External axes can be added to the active project in the configuration area of CPRog/iRC | External axes can be added to the active project in the configuration area of CPRog/iRC | ||
Revision as of 08:01, 3 November 2020
This Document describes how to add an external Axis. An additional Stepper Motor Module is required to control the external Axis.
Hardware Connections
Connect the external Axis just like all other axes. See pinout below:
Configuration
Switch on the Robot and start CPRog/iRC.
Click on "File". Then select your Robot type.
Click on Connect. Once connected, click on "File" again.
Click on "Configure Project"
Click on "External Axes"
Configure your external Axis.
File:ExternalAxis1.png|
Configuration
External axes can be added to the active project in the configuration area of CPRog/iRC
