Difference between revisions of "Glossary"
From Wiki
| Line 40: | Line 40: | ||
| Motor encoder, i.e. an encoder mounted directly at the motor | | Motor encoder, i.e. an encoder mounted directly at the motor | ||
| | | | ||
| + | |- | ||
| + | | PLC | ||
| + | | Programmable Logic Controller | ||
| + | | https://en.wikipedia.org/wiki/Programmable_logic_controller | ||
|- | |- | ||
| SRA | | SRA | ||
Revision as of 22:34, 5 June 2018
| Name | Description | Link |
|---|---|---|
| AE | Stands for "Abtriebencoder", which is an output encoder, i.e. an encoder mounted at the gear rather than at the motor. | https://www.igus.co.uk/product/14792 |
| A1, A2, A3... | Robot axes (same as J1, J2, J3,...): A1 would be the first axis/joint counting from the base of the robot. | |
| CAN bus | Controller Area Network | https://en.wikipedia.org/wiki/CAN_bus |
| CPR | Commonplace Robotics GmbH | http://www.cpr-robots.com |
| CPRog | 3D robot programming and control software with graphical program editor | http://www.cpr-robots.com/products/cprog.html |
| DIO | Digital input/output | Digital_Inputs_/_Outputs |
| DOF | Degrees of Freedom / the number of robot joints or axes. | |
| J1, J2, J3,... | Robot joints (same as A1, A2, A3): J1 would be the first joint/axis counting from the base of the robot. | |
| ME | Motor encoder, i.e. an encoder mounted directly at the motor | |
| PLC | Programmable Logic Controller | https://en.wikipedia.org/wiki/Programmable_logic_controller |
| SRA | Service Robot Arm | http://www.cpr-robots.com/products/sra.html |
| ROS | Robot Operating System | http://www.ros.org |
