Difference between revisions of "Rebel Joint"

From Wiki
Line 6: Line 6:
 
Documentation of the motor controller in  
 
Documentation of the motor controller in  
  
EN: [https://cpr-robots.com/download/DocumentationEN/BLDCBoard_UserGuide_iRC_V0-7_en.pdf BLDCBoardUserGuide_V0-7_en.pdf]
+
DE: [https://cpr-robots.com/download/DocumentationDE/BLDCBoard_UserGuide_iRC_V0-7_de.pdf BLDCBoardUserGuide_V2-0_de.pdf]
  
DE: [https://cpr-robots.com/download/DocumentationDE/BLDCBoard_UserGuide_iRC_V0-7_de.pdf BLDCBoardUserGuide_V2-0_de.pdf]
+
EN: [https://cpr-robots.com/download/DocumentationEN/BLDCBoard_UserGuide_iRC_V0-7_en.pdf BLDCBoardUserGuide_V0-7_en.pdf (Update will follow soon)]
  
  

Revision as of 10:51, 22 April 2022

This page provides information and first steps support on the igus Rebel joint modules.

Manual

Product user guide: (will follow soon).

Documentation of the motor controller in

DE: BLDCBoardUserGuide_V2-0_de.pdf

EN: BLDCBoardUserGuide_V0-7_en.pdf (Update will follow soon)


This document contains dimensions, pin-outs, behavior and the description of the parameter. The communication protocol is described below.

Test and Configuration Software

The software tool "ModuleControl" allows to move a single joint in different operations modes. It also allows to change the motion parameter on the board. ModuleControl needs a USB to CAN adapter from PeakSysteme, the PCAN-USB.

Please download the software at the ModuleControl wiki page, please use the ClosedLoop-Version: Config Software ModuleCtrl

Communication Protocol

The motor controller uses a CAN based custom protocol called CPRCANV2. This simple protocol sends and receives 32 bit position information. CANopen ist not supported.

Protocol specification:

Demo Source Code

A C# VisualStudio2019 solution is available to show the basic communication with a Rebel joint. This demo code makes use of the Peak Systeme PCAN-USB adapter. The demo source code lies on github: CANV2ProtocolDemoClient

Contact

In case of questions please contact Alexander Mühlens at igus GmbH.