Difference between revisions of "Glossary"
From Wiki
Line 38: | Line 38: | ||
|- | |- | ||
| ME | | ME | ||
− | | Motor encoder, mounted directly at the motor | + | | Motor encoder, i.e. an encoder mounted directly at the motor |
| | | | ||
|- | |- |
Revision as of 20:38, 15 May 2018
Name | Description | Link |
---|---|---|
AE | Stands for AbtriebsEncoder, which an encoder mounted at the gear rather than at the motor. | https://www.igus.co.uk/product/14792 |
A1, A2, A3... | Robot axes (same as J1, J2, J3,...): A1 would be the first axis counting from the base of the robot. | |
CAN bus | Controller Area Network | https://en.wikipedia.org/wiki/CAN_bus |
CPR | Commonplace Robotics GmbH | http://www.cpr-robots.com |
CPRog | 3D robot programming and control software with graphical program editor | http://www.cpr-robots.com/products/cprog.html |
DIO | Digital input/output | Digital_Inputs_/_Outputs |
DOF | Degrees of Freedom / the number of robot joints or axes. | |
J1, J2, J3,... | Robot joints (same as A1, A2, A3): J1 would be the first joint counting from the base of the robot. | |
ME | Motor encoder, i.e. an encoder mounted directly at the motor | |
SRA | Service Robot Arm | http://www.cpr-robots.com/products/sra.html |
ROS | Robot Operating System | http://www.ros.org |