External Linear Axis in CPRog v980-10-XXX

From Wiki
Revision as of 14:15, 20 November 2018 by Peter (talk | contribs) (Created page with "To use an external linear axis an additional stepper motor module needs to be configured, changes to the project file need to be made and a robot file for the external linear...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

To use an external linear axis an additional stepper motor module needs to be configured, changes to the project file need to be made and a robot file for the external linear axis has to be installed and potentially adapted.

Module Configuration

The stepper motor module will need new firmware parameters. These have to be configured using the ModuleCtrl Software

Retrieved from "http://wiki.cpr-robots.com/index.php?title=External_Linear_Axis_in_CPRog_v980-10-XXX&oldid=1881"