Rebel Joint

This page provides information and first steps support on the igus Rebel joint modules.

Manual

Product user guide: (will follow soon).

Documentation of the motor controller in

EN: BLDCBoardUserGuide_V0-7_en.pdf

DE: BLDCBoardUserGuide_V0-7_de.pdf

This document contains dimensions, pin-outs, behavior and the description of the parameter. The communication protocol is described below.

Test and Configuration Software

The software tool "ModuleControl" allows to move a single joint in different operations modes. It also allows to change the motion parameter on the board. ModuleControl needs a USB to CAN adapter from PeakSysteme, the PCAN-USB.

Download: ModuleControlClosedLoop

Communication Protocol

The motor controller uses a CAN based custom protocol called CPRCANV2. This simple protocol sends and receives 32 bit position information. CANopen ist not supported.

Protocol specification: CPRCANV2 protocol specification

Demo Source Code

A C# VisualStudio2019 solution is available to show the basic communication with a Rebel joint. This demo code makes use of the Peak Systeme PCAN-USB adapter. The demo source code lies on github: CANV2ProtocolDemoClient

Contact

In case of questions please contact Alexander Mühlens at igus GmbH.