Difference between revisions of "Additional DIO-Modules"
From Wiki
(Created page with "=Scope= The Commonplace Robotics control for the igus robolink robots comes with one digital input / output module with seven digital inputs (24V via Optocoupler) and 7 digita...") |
|||
| Line 4: | Line 4: | ||
=Mechanical Integration= | =Mechanical Integration= | ||
| − | [[file: | + | [[file:Caution.png|frameless|50px] Do not hotplug! Disconnect the control from the power source before changing components of plugging / unplugging cables! |
| − | + | *Add the bus extenders to the control. They have to be pressed in the C-Rail and pressed to the existing control beneath the Digital IO module. | |
| + | *Plug the additional digital IO module | ||
| + | *Set the CAN ID with the selector on the front face: | ||
| + | **First (already existing) IO module: 0 (this results in CAN ID 0x70 = 112) | ||
| + | **Second (additional) IO module: 2 (this results in CAN ID 0x80 = 128) | ||
| + | **Third (additional) IO module: 4 (this results in CAN ID 0x90 = 144) | ||
| + | [[file:DIO_bus_settings.png|DIO_bus_settings.png]] | ||
Revision as of 14:04, 18 June 2018
Scope
The Commonplace Robotics control for the igus robolink robots comes with one digital input / output module with seven digital inputs (24V via Optocoupler) and 7 digital outputs (24V max 300 mA via reed relay). If these DIOs are not enough it is possible to add two further digital input / output modules to the control.
Mechanical Integration
[[file:Caution.png|frameless|50px] Do not hotplug! Disconnect the control from the power source before changing components of plugging / unplugging cables!
- Add the bus extenders to the control. They have to be pressed in the C-Rail and pressed to the existing control beneath the Digital IO module.
- Plug the additional digital IO module
- Set the CAN ID with the selector on the front face:
- First (already existing) IO module: 0 (this results in CAN ID 0x70 = 112)
- Second (additional) IO module: 2 (this results in CAN ID 0x80 = 128)
- Third (additional) IO module: 4 (this results in CAN ID 0x90 = 144)
