Difference between revisions of "TinyCtrl Initial Setup of Linux Board"

From Wiki
(Created page with "''' Note that any Board that ordered from Commonplace Robotics will definitely have been set up like this already.''' However this document may provide some insight about what...")
 
Line 1: Line 1:
 
''' Note that any Board that ordered from Commonplace Robotics will definitely have been set up like this already.'''
 
''' Note that any Board that ordered from Commonplace Robotics will definitely have been set up like this already.'''
 
However this document may provide some insight about what is happening behind the scenes:
 
However this document may provide some insight about what is happening behind the scenes:
 +
 +
This is what we do to a virgin Phytec board when integrating it into a DCi robot.
 +
 +
This document assumes that you know what you're doing and that you are familiar with linux console environments.
 +
 +
==Download==
 +
Download the full, zipped folder structure: [[media:TinyCtrl_Full.zip|TinyCtrl_Full]]
 +
 +
==Copy TinyCtrl/ into /home/root/==
 +
scp TinyCtrl_Full.zip root@192.168.3.11:/home/root/
 +
unzip TinyCtrl_Full.zip
 +
rm TinyCtrl_Full.zip
 +
cd TinyCtrl
 +
chmod +x TinyCtrl
 +
chmod +x startBatch.sh
 +
cd
  
 
==Install TinyCtrl Service==
 
==Install TinyCtrl Service==

Revision as of 10:33, 22 June 2018

Note that any Board that ordered from Commonplace Robotics will definitely have been set up like this already. However this document may provide some insight about what is happening behind the scenes:

This is what we do to a virgin Phytec board when integrating it into a DCi robot.

This document assumes that you know what you're doing and that you are familiar with linux console environments.

Download

Download the full, zipped folder structure: TinyCtrl_Full

Copy TinyCtrl/ into /home/root/

scp TinyCtrl_Full.zip root@192.168.3.11:/home/root/
unzip TinyCtrl_Full.zip
rm TinyCtrl_Full.zip
cd TinyCtrl
chmod +x TinyCtrl
chmod +x startBatch.sh
cd

Install TinyCtrl Service

vi /etc/system/system/autostart_tinyctrl.service

paste this:

# This is part of systemd.

[Unit]
Description=TinyCtrl autostart
DefaultDependencies=no


[Service]
Type=oneshot
RemainAfterExit=yes
ExecStart=/home/root/TinyCtrl/startBatch.sh
StandardOutput=syslog

[Install]
WantedBy=sysinit.target

save and close.

:wq!