Jump to content

Tilt / Swivel Joints: Revision history

Diff selection: Mark the radio buttons of the revisions to compare and hit enter or the button at the bottom.
Legend: (cur) = difference with latest revision, (prev) = difference with preceding revision, m = minor edit.

30 July 2026

29 July 2026

28 July 2026

  • curprev 11:2111:21, 28 July 2026 MAB talk contribs m 4,451 bytes +84 No edit summary
  • curprev 11:2011:20, 28 July 2026 MAB talk contribs 4,367 bytes +4,367 Created page with "Additional axes can be added to some robot kinematics to allow the tool's orientation to be changed. In the simplest case this is a fourth axis at a XYZ gantry that turns the gripper. In more complex situations the tool can also be tilted, e.g. to do manipulations at the workpiece's side. The igus Robot Control supports this in three ways: The tilt/swivel joints, the legacy fourth axis and as external axes. This guide explains the different approaches a..."
Retrieved from "https://wiki.cpr-robots.com/index.php/Tilt_/_Swivel_Joints"