Difference between revisions of "TinyCtrl Downloads"

Revision as of 15:03, 5 June 2018

Here you can find updates for the TinyCtrl robot control software and running on embedded Linux devices. Also the current documentation is available.

Software: Download latest TinyCtrl binary. Preliminary Version! This binary can be uploaded to the embedded robot control

Extended documentation is following.

Download the current TinyCtrl binary, store the binary e.g. in c:/CPRog/Data/Download/
Start the robolink-DCi robot
Connect both computer with an ethernet cable. The Windows computer needs to be set to a static IP like 192.168.3.2
Start the CPRog software (Version from June 3rd 2018 or later)
Verify that the project "robolink_5DOF_SV.prj" is loaded
Press the "Connect" button
Choose the menu button "Upper-left-circle / Embedded Robot Control / Download Binary"
Choose the current TinyCtrl binary
CPRog now stops the running robot control on the robolink-DCi, and downloads the new version.
Choose the menu button "Upper-left-circle / Embedded Robot Control / Start Control" to start the new robot control
To verify the new version you can check the logfile

Revision as of 15:01, 5 June 2018 (view source) Peter (talk \| contribs) ← Older edit		Revision as of 15:03, 5 June 2018 (view source) Peter (talk \| contribs) Newer edit →
Line 24:		Line 24:
	* To verify the new version you can check the logfile		* To verify the new version you can check the logfile

−	[[Category:Downloads]]	+	[[Category:Downloads]][[Category:TinyCtrl]]