Difference between revisions of "Robot Hardware Troubleshooting"
From Wiki
| Line 2: | Line 2: | ||
! Problem !! Cause !! Correction | ! Problem !! Cause !! Correction | ||
|- | |- | ||
| − | | Excessively jerky movement or acceleration and stall of the last joint of a robolink robot during | + | | Excessively jerky movement or acceleration and stall of the last joint of a robolink robot during initial set up of the robot|| Wrong encoder direction || [[Set_up,_testing_of_single_joints#Swap encoder direction|Swap encoder direction]] of this joint |
|} | |} | ||
Revision as of 08:40, 12 May 2018
| Problem | Cause | Correction |
|---|---|---|
| Excessively jerky movement or acceleration and stall of the last joint of a robolink robot during initial set up of the robot | Wrong encoder direction | Swap encoder direction of this joint |
