Software Updates

From Wiki

Here you can find updates for the CPRog robot programming environment and the corresponding documentation.

Download current CPRog Robot Programming Environment

a) Version 10: For robolink arms and drylin 3 axis gantries - not for Movers

Improved motion with acceleration profile, improved condition parser. Notice: Program syntax changes, V09 programs will not run without adaptions!

Caution.png

When using the standard installation directory, the installation of the update is done on top of the current program version. This will not delete user generated files (program files or the license). However, it will update the standard configuration files in turn erase user changes made to those files. To prevent this rename the old installation e.g. to c:\CPRogold prior to running the installer.

b) Version 09: For Movers

This version supports the following robots: Mover4, Lucas-Nuelle Mover4HD, Mover5, Mover6. The correct project with your specific robot arm can be loaded using the 'open project' menu entry in the upper left circle.


Caution.png

When using the standard installation directory, the installation of the update is done on top of the current program version. This will not delete user generated files (program files or the license). However, it will update the standard configuration files in turn erase user changes made to those files. To prevent this rename the old installation e.g. to c:\CPRogold prior to running the installer.


Caution.png

Since V08 the 'gripper' command is used to operate the gripper. This allows the use of more complex grippers with servo-drives and several joints. The previous procedure using the digital outputs 11 and 12 is obsolete. Existing programs have to be adapted.


Documentation

Installation

Installation has to be done in C:\CPRog. CPRog requires a specific DirectX version and .net framework 3.5 or higher (see below). If an old CPRog installation is updated, no changes to DirectX or .net Framework are necessary. If CPRog is installed for the first time, the following packages have to be installed:

Prerequisites

If you install CPRog from the CD supplied with your control electronics, DirectX9.0c and .net Framework and the PCAN-USB adapter driver are installed directly from the CD. If the installer starts without CD, it tries to download the dependencies from the internet. This requires a working internet connection.

Demo

Programming and control of a robolink DCi robot in CPRog.