|
|
| (27 intermediate revisions by 2 users not shown) |
| Line 1: |
Line 1: |
| − | Here you can find updates for the TinyCtrl robot control software and running on embedded Linux devices. Also the current documentation is available.
| + | Please proceed to [[Software Updates]].. |
| − | | |
| − | == Download current TinyCtrl version ==
| |
| − |
| |
| − | *Software: [http://www.cpr-robots.com/download//TinyCtrl/TinyCtrl_V980-04-18 Download latest TinyCtrl binary]. Preliminary Version! This binary can be uploaded to the embedded robot control
| |
| − | | |
| − | *[[Software change-log TinyCtrl]]
| |
| − | *Command Reference EN: [http://www.cpr-robots.com/download/CPRog/CPR_CommandReference.pdf CPRog Command Reference]
| |
| − | | |
| − | == How to upgrade ==
| |
| − | | |
| − | Extended documentation is following.
| |
| − | | |
| − | * Download the current TinyCtrl binary, store the binary e.g. in c:/CPRog/Data/Download/
| |
| − | * Start the robolink-DCi robot
| |
| − | * Connect both computer with an ethernet cable. The Windows computer needs to be set to a static IP like 192.168.3.2
| |
| − | * Start the CPRog software (Version from June 3rd 2018 or later)
| |
| − | * Verify that the project "robolink_5DOF_SV.prj" is loaded
| |
| − | * Press the "Connect" button
| |
| − | * Choose the menu button "Upper-left-circle / Embedded Robot Control / Download Binary"
| |
| − | * Choose the current TinyCtrl binary
| |
| − | * CPRog now stops the running robot control on the robolink-DCi, and downloads the new version.
| |
| − | * Choose the menu button "Upper-left-circle / Embedded Robot Control / Start Control" to start the new robot control
| |
| − | * To verify the new version you can check the logfile
| |
| | | | |
| | [[Category:Downloads]][[Category:TinyCtrl]][[Category:CPRog]] | | [[Category:Downloads]][[Category:TinyCtrl]][[Category:CPRog]] |
