Difference between revisions of "TinyCtrl Downloads"
From Wiki
| Line 14: | Line 14: | ||
* Download the [http://www.cpr-robots.com/download//TinyCtrl/TinyCtrl_V980-04-18 latest TinyCtrl binary], store the binary e.g. in c:/CPRog/Data/Download/ | * Download the [http://www.cpr-robots.com/download//TinyCtrl/TinyCtrl_V980-04-18 latest TinyCtrl binary], store the binary e.g. in c:/CPRog/Data/Download/ | ||
* Start the [https://www.igus.com/product/17662 robolink-DCi robot] | * Start the [https://www.igus.com/product/17662 robolink-DCi robot] | ||
| − | * Connect both computers, i.e. the embedded linux computer and the Windows PC, with an ethernet cable. | + | * Connect both computers, i.e. the embedded linux computer and the Windows PC, with an ethernet cable. Use the right LAN port on the embedded Linux Board. |
**The Windows computer needs to be set to a static IP like <code>192.168.3.2</code>. | **The Windows computer needs to be set to a static IP like <code>192.168.3.2</code>. | ||
**(The Linux embedded computer has IP <code>192.168.3.11</code>, subnet <code>255.255.255.0</code> by default.) | **(The Linux embedded computer has IP <code>192.168.3.11</code>, subnet <code>255.255.255.0</code> by default.) | ||
Revision as of 08:50, 22 June 2018
Here you can find updates for the TinyCtrl robot control software for embedded Linux devices. Also the current documentation is available below.
Download current TinyCtrl version
- Software: Download the latest TinyCtrl binary. Preliminary Version! This binary can be uploaded to the embedded robot control
- Software change-log TinyCtrl
- Command Reference EN: CPRog Command Reference
How to upgrade
Extended documentation is following.
- Download the latest TinyCtrl binary, store the binary e.g. in c:/CPRog/Data/Download/
- Start the robolink-DCi robot
- Connect both computers, i.e. the embedded linux computer and the Windows PC, with an ethernet cable. Use the right LAN port on the embedded Linux Board.
- The Windows computer needs to be set to a static IP like
192.168.3.2. - (The Linux embedded computer has IP
192.168.3.11, subnet255.255.255.0by default.)
- The Windows computer needs to be set to a static IP like
- Start the CPRog software (Version from June 3rd 2018 or later)
- Verify that the project "robolink_5DOF_SV.prj" is loaded in CPRog.
- Press the "Connect" button in CPRog
- Choose the menu button "Upper-left-circle --> Embedded Robot Control --> Download Binary"
- Choose the current TinyCtrl binary that you have just downloaded
- CPRog now stops the TinyCtrl binary, which is running on the robolink-DCi linux board and downloads the new version from the Windows PC to the linux board.
- Choose the menu button "Upper-left-circle --> Embedded Robot Control --> Start Control" to start the new TinyCtrl binary.
- To verify the TinyCtrl version that is installed on the linux board, you can check the logfile on the linux board from the Teach Pendant (touch screen remote).
