Difference between revisions of "Software Updates"
Line 8: | Line 8: | ||
[http://www.cpr-robots.com/download/CPRog/CPRogInstaller_V902-09.exe Download latest CPRog V902-09 Installer] | [http://www.cpr-robots.com/download/CPRog/CPRogInstaller_V902-09.exe Download latest CPRog V902-09 Installer] | ||
− | This version supports the following robots: Mover4 | + | This version supports the following robots: Mover4, Lucas-Nuelle Mover4HD, Mover5, Mover6, SRA, igus_gantry, igus robolink. The correct project with your specific robot arm can be loaded using the 'open project' menu entry in the upper left circle. |
Attention!! The 'gripper' command since V08 operates the gripper now. This allows to make use of more complex grippers with servodrives and several joints. The previous use of the digital outputs 11 and 12 does not work anymore. Existing programs have to be adapted. | Attention!! The 'gripper' command since V08 operates the gripper now. This allows to make use of more complex grippers with servodrives and several joints. The previous use of the digital outputs 11 and 12 does not work anymore. Existing programs have to be adapted. |
Revision as of 09:50, 25 August 2017
Here you can find updates for the CPRog robot programming environment and the according documentation.
Attention! When using the standard installation directory the installation is done on top of the current program version. This will not delete user generated files (program files or the license) but will update the standard configuration files and doing this erase user changes. To prevent this rename the old installation e.g. to c:\CPRogold.
Download current CPRog Robot Programming Environment
Download latest CPRog V902-09 Installer
This version supports the following robots: Mover4, Lucas-Nuelle Mover4HD, Mover5, Mover6, SRA, igus_gantry, igus robolink. The correct project with your specific robot arm can be loaded using the 'open project' menu entry in the upper left circle.
Attention!! The 'gripper' command since V08 operates the gripper now. This allows to make use of more complex grippers with servodrives and several joints. The previous use of the digital outputs 11 and 12 does not work anymore. Existing programs have to be adapted.
Change Log
- V902-09-010, Aug 14th, 2017 robolink DQ added, bug in DIO module removed, PLC Interface and reference-in-one added
- V902-09-009, May 18th, 2017 Major updates, still minor debugging to do. Text editor with several programs, igus robolink variants added
- V902-09-006, Nov. 17th, 2016 GearPlay added for CANV2 (Mover6), minor debugging
- V902-09-005, Nov. 15th, 2016 Joypad direction can be set in project file, minor debugging, igus robots added
- V902-09-004 Nov . 4nd 2016 Minor debugging
- V902-09-003 Nov . 2nd 2016 Preliminary! general debugging
- V902-09-002 Nov . 1st 2016 Preliminary! graphics debugging, alignment, gripper command, syntax check in textedit, general debugging
Documentation
- robolink User Guide
- Mover4 User Guide
- Mover6 User Guide
- For the CRI robot interface user guide go to the according page: CRI Ethernet Interface
- For the CAN-protocol documentation go to the according page CAN Protocol
Installation
Installation has to be done in c:\CPRog. CPRog requires a specific DirectX version and the .net framework. If an old version is updated no changes are necessary. If the installation is done the first time on the computer the files can be installed here:
- Directx 9.0c: (exactly this version) A newer version might already be installed. It is no problem to install two versions in parallel. You can search the web for the download or use this link [https://www.microsoft.com/de-de/download/details.aspx?id=34429 https://www.microsoft.com/de-de/download/details.aspx?id=34429}
- .net Framework: 3.5 or higher.
When the installer starts from CD these frameworks are loaded from the CD. When the installer starts without CD it tries to download the frameworks from the internet. This requires a running internet connection and takes quite a time. Alternatively install by hand.