TinyCtrl Downloads

Here you can find updates for the TinyCtrl robot control software for embedded Linux devices. Also the current documentation is available below.

Download current TinyCtrl version

Software: Download the latest TinyCtrl binary. Preliminary Version! This binary can be uploaded to the embedded robot control

Extended documentation is following.

Download the latest TinyCtrl binary, store the binary e.g. in c:/CPRog/Data/Download/
Start the robolink-DCi robot
Connect both computers, i.e. the embedded linux computer and the Windows PC, with an ethernet cable. The Windows computer needs to be set to a static IP like 192.168.3.2. (The Linux embedded computer has IP 192.168.3.11, subnet 255.255.255.0 by default.)
Start the CPRog software (Version from June 3rd 2018 or later)
Verify that the project "robolink_5DOF_SV.prj" is loaded in CPRog.
Press the "Connect" button in CPRog
Choose the menu button "Upper-left-circle --> Embedded Robot Control --> Download Binary"
Choose the current TinyCtrl binary that you have just downloaded
CPRog now stops the TinyCtrl binary, which is running on the robolink-DCi linux board and downloads the new version from the Windows PC to the linux board.
Choose the menu button "Upper-left-circle --> Embedded Robot Control --> Start Control" to start the new TinyCtrl binary.
To verify the TinyCtrl version that is installed on the linux board, you can check the logfile on the linux board from the Teach Pendant (touch screen).