DCi upgrade guide

From CPR Wiki
Jump to: navigation, search

The components of this guide will get updated on the 22nd of August. Although the upgrade does work as it is, I will attempt to simplify the instructions by then and upload a new CPRog Version.

  1. To start with CPRog on your PC needs to be upgraded. Have a look here for installation instructions and the latest version. You need version 10.
  2. To upgrade the DCi robot, it needs to be connected to a PC via a LAN cable. Have a look here for details
  3. Now head over to TinyCtrl Downloads and follow the upgrade instructions to upgrade the software running on the embedded Linux board on the robot.