DCi upgrade guide: Difference between revisions
Created page with "'''The components of this guide will get updated on the 22nd of August. Although the upgrade does work as it is, I will attempt to simplify the instructions by then and upload a new CPRog Version.''' #To start with CPRog on your PC needs to be upgraded. Have a look here for installation instructions and the latest version. You need version 10. #To upgrade the DCi robot, it ne..." |
(No difference)
|
Latest revision as of 11:35, 11 August 2025
The components of this guide will get updated on the 22nd of August. Although the upgrade does work as it is, I will attempt to simplify the instructions by then and upload a new CPRog Version.
- To start with CPRog on your PC needs to be upgraded. Have a look here for installation instructions and the latest version. You need version 10.
- To upgrade the DCi robot, it needs to be connected to a PC via a LAN cable. Have a look here for details
- Now head over to TinyCtrl Downloads and follow the upgrade instructions to upgrade the software running on the embedded Linux board on the robot.