Difference between revisions of "Software Updates"
m (V13-024) |
(Reformatted the article and included links to iRC V12 and V13) |
||
| Line 1: | Line 1: | ||
| − | + | Below you will find links to the current versions of the robot control software. | |
| + | * '''CPRog:''' Robot control and programming software | ||
| + | * '''igus Robot Control (iRC):''' Functionally equal to CPRog but with an igus specific selection of robots | ||
| + | * '''TinyCtrl:''' The robot control software that runs on the embedded computer. It is controlled via CPRog, iRC or its interfaces. | ||
| − | |||
| + | [[file:caution.png|left|25px]] Caution! After a software update test your robot programs for compatibility and motion deviations first with small velocites! | ||
| − | |||
| − | + | = System Requirements = | |
| + | CPRog/iRC requires the following to run: | ||
| + | * Windows 10 64 bit | ||
| + | * .NET Framework 4.7.2 or higher | ||
| + | * OpenGL 3.0 or higher | ||
| + | * The driver from your graphics card manufacturer (the Microsoft default driver does not work) | ||
| − | + | = Downloads = | |
| + | Both CPRog and iRC are available as a standalone installer for Windows and bundled with the TinyCtrl updater. | ||
| − | + | Latest changes: [https://cpr-robots.com/download/igusRobotControl/Software/VersionInfo.txt Changelog] | |
| + | == igus Robot Control == | ||
| + | * [[IgusRobotControl-Release13-EN|Version 13]] | ||
| + | * [[IgusRobotControl-Release12-EN|Version 12]] | ||
| − | CPRog | + | == CPRog == |
| + | === Installer for Windows === | ||
* [https://cpr-robots.com/download/CPRog/Installer_CPRog_V13-024.exe Version V13-024] | * [https://cpr-robots.com/download/CPRog/Installer_CPRog_V13-024.exe Version V13-024] | ||
* [https://cpr-robots.com/download/CPRog/Installer_CPRog_V12-028.exe Version V12-028] | * [https://cpr-robots.com/download/CPRog/Installer_CPRog_V12-028.exe Version V12-028] | ||
| − | + | === Updater CPRog and TinyCtrl === | |
| − | |||
| − | == Updater CPRog and TinyCtrl == | ||
| − | |||
| − | |||
| − | |||
* [https://cpr-robots.com/download/TinyCtrlUpdater/Updater_CPROG_V13-024.zip Updater_CPROG_V13-024.zip] | * [https://cpr-robots.com/download/TinyCtrlUpdater/Updater_CPROG_V13-024.zip Updater_CPROG_V13-024.zip] | ||
* [https://cpr-robots.com/download/TinyCtrlUpdater/Updater_CPROG_V12-028.zip Updater_CPROG_V12-028.zip] | * [https://cpr-robots.com/download/TinyCtrlUpdater/Updater_CPROG_V12-028.zip Updater_CPROG_V12-028.zip] | ||
| − | + | = Documentation = | |
| + | |||
| + | We are currently updating the CPRog documentation, until then please use the documentation for the iRC igus Robot Control. The functionality is identical. | ||
| − | + | You can find the user guide for your robot here: [[Documentation]]. | |
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | + | = Installation = | |
| − | [[file:caution.png|left|25px]]When using the standard installation directory, the installation of the update is done on top of the current program version. This will not delete user generated files (program files or the license). However, it will update the standard configuration files | + | [[file:caution.png|left|25px]]When using the standard installation directory, the installation of the update is done on top of the current program version. This will not delete user generated files (program files or the license). However, it will update the standard configuration files and erase user changes made to those files. To prevent this rename the old installation e.g. to <code>c:\CPRogold</code> prior to running the installer. You can copy your changed configurations over from the Data\Programs, Data\Projects, Data\Robots and Data\Tools directories inside the installation directory. |
Please run the Installer_CPRog_V902_nn-nnn.exe. The installation has to be done in C:\CPRog. | Please run the Installer_CPRog_V902_nn-nnn.exe. The installation has to be done in C:\CPRog. | ||
| − | = | + | = Backward Compatibility = |
Hardware: The current software version is compatible to all igus robots and all Mover robots delivered in 2017 and later. | Hardware: The current software version is compatible to all igus robots and all Mover robots delivered in 2017 and later. | ||
| − | Robot Programs: The current software versions are compatible to the versions shipped since July 2018: V902-10-021 and higher. | + | Robot Programs: The current software versions are compatible to the versions shipped since July 2018: V902-10-021 and higher. Configuration changes may cause different behavior so after an update please test the program with a low velocity override. |
Interfaces: Please see the according interface documentation. | Interfaces: Please see the according interface documentation. | ||
Revision as of 13:11, 10 August 2022
Below you will find links to the current versions of the robot control software.
- CPRog: Robot control and programming software
- igus Robot Control (iRC): Functionally equal to CPRog but with an igus specific selection of robots
- TinyCtrl: The robot control software that runs on the embedded computer. It is controlled via CPRog, iRC or its interfaces.
Caution! After a software update test your robot programs for compatibility and motion deviations first with small velocites!
System Requirements
CPRog/iRC requires the following to run:
- Windows 10 64 bit
- .NET Framework 4.7.2 or higher
- OpenGL 3.0 or higher
- The driver from your graphics card manufacturer (the Microsoft default driver does not work)
Downloads
Both CPRog and iRC are available as a standalone installer for Windows and bundled with the TinyCtrl updater.
Latest changes: Changelog
igus Robot Control
CPRog
Installer for Windows
Updater CPRog and TinyCtrl
Documentation
We are currently updating the CPRog documentation, until then please use the documentation for the iRC igus Robot Control. The functionality is identical.
You can find the user guide for your robot here: Documentation.
Installation
When using the standard installation directory, the installation of the update is done on top of the current program version. This will not delete user generated files (program files or the license). However, it will update the standard configuration files and erase user changes made to those files. To prevent this rename the old installation e.g. to c:\CPRogold prior to running the installer. You can copy your changed configurations over from the Data\Programs, Data\Projects, Data\Robots and Data\Tools directories inside the installation directory.
Please run the Installer_CPRog_V902_nn-nnn.exe. The installation has to be done in C:\CPRog.
Backward Compatibility
Hardware: The current software version is compatible to all igus robots and all Mover robots delivered in 2017 and later.
Robot Programs: The current software versions are compatible to the versions shipped since July 2018: V902-10-021 and higher. Configuration changes may cause different behavior so after an update please test the program with a low velocity override.
Interfaces: Please see the according interface documentation.
If there are any incompatibilites please get to us, we can solve the problem!
