Difference between revisions of "DCi upgrade guide"
From Wiki
| Line 1: | Line 1: | ||
| − | '''The components of this guide will get updated on the 22nd of August. Please wait for me to make changes to the instructions. | + | '''The components of this guide will get updated on the 22nd of August. Please wait for me to make changes to the instructions. Although it does work as it is, I will attempt to simplify the instructions by then.''' |
#To start with CPRog on your PC needs to be upgraded. Have a look [[CPRog_Downloads#a) Version 10: For robolink arms and drylin 3 axis gantries - not for Movers|here for installation instructions and the latest version]]. You need version 10. | #To start with CPRog on your PC needs to be upgraded. Have a look [[CPRog_Downloads#a) Version 10: For robolink arms and drylin 3 axis gantries - not for Movers|here for installation instructions and the latest version]]. You need version 10. | ||
#To upgrade the DCi robot, it needs to be connected to a PC via a LAN cable. Have a look [[Template:Connect DCi Robot/TinyCtrl to a Laptop via LAN|here for details]] | #To upgrade the DCi robot, it needs to be connected to a PC via a LAN cable. Have a look [[Template:Connect DCi Robot/TinyCtrl to a Laptop via LAN|here for details]] | ||
#Now head over to [[TinyCtrl_Downloads|TinyCtrl Downloads]] and follow the upgrade instructions to upgrade the software running on the embedded Linux board on the robot. | #Now head over to [[TinyCtrl_Downloads|TinyCtrl Downloads]] and follow the upgrade instructions to upgrade the software running on the embedded Linux board on the robot. | ||
Revision as of 21:21, 20 August 2018
The components of this guide will get updated on the 22nd of August. Please wait for me to make changes to the instructions. Although it does work as it is, I will attempt to simplify the instructions by then.
- To start with CPRog on your PC needs to be upgraded. Have a look here for installation instructions and the latest version. You need version 10.
- To upgrade the DCi robot, it needs to be connected to a PC via a LAN cable. Have a look here for details
- Now head over to TinyCtrl Downloads and follow the upgrade instructions to upgrade the software running on the embedded Linux board on the robot.
