Difference between revisions of "DCi upgrade guide"
From Wiki
| Line 1: | Line 1: | ||
| − | '''The components of this guide will get updated on the 22nd of August. | + | '''The components of this guide will get updated on the 22nd of August. Although the upgrade does work as it is, I will attempt to simplify the instructions by then and upload a new CPRog Version.''' |
#To start with CPRog on your PC needs to be upgraded. Have a look [[CPRog_Downloads#a) Version 10: For robolink arms and drylin 3 axis gantries - not for Movers|here for installation instructions and the latest version]]. You need version 10. | #To start with CPRog on your PC needs to be upgraded. Have a look [[CPRog_Downloads#a) Version 10: For robolink arms and drylin 3 axis gantries - not for Movers|here for installation instructions and the latest version]]. You need version 10. | ||
#To upgrade the DCi robot, it needs to be connected to a PC via a LAN cable. Have a look [[Template:Connect DCi Robot/TinyCtrl to a Laptop via LAN|here for details]] | #To upgrade the DCi robot, it needs to be connected to a PC via a LAN cable. Have a look [[Template:Connect DCi Robot/TinyCtrl to a Laptop via LAN|here for details]] | ||
#Now head over to [[TinyCtrl_Downloads|TinyCtrl Downloads]] and follow the upgrade instructions to upgrade the software running on the embedded Linux board on the robot. | #Now head over to [[TinyCtrl_Downloads|TinyCtrl Downloads]] and follow the upgrade instructions to upgrade the software running on the embedded Linux board on the robot. | ||
Revision as of 21:22, 20 August 2018
The components of this guide will get updated on the 22nd of August. Although the upgrade does work as it is, I will attempt to simplify the instructions by then and upload a new CPRog Version.
- To start with CPRog on your PC needs to be upgraded. Have a look here for installation instructions and the latest version. You need version 10.
- To upgrade the DCi robot, it needs to be connected to a PC via a LAN cable. Have a look here for details
- Now head over to TinyCtrl Downloads and follow the upgrade instructions to upgrade the software running on the embedded Linux board on the robot.
